TQ R/C & Hobbies

Electric R/C Car Series no.727

1/10 R/C Mitsubishi Pajero (CW-01)

Item No: 58727

★This R/C model assembly kit creates a stylized version of the Mitsubishi Pajero, a car first sold in 1982 and a hit in many countries under different names. ★The model uses a durable chassis with box type chassis, front swing arm and rear rolling rigid suspension setups, plus four oil dampers. ★The body is molded in durable plastic, and features depictions of a tool box and other accessories in the rear.

Information is current as of September 5, 2023. Specifications are subject to change without notice.

1/20 Grand Prix Collection no.71

Porsche 935 Vaillant

Item No: 20071

★This 1/20 scale plastic model assembly kit recreates the Porsche 935 sponsored in 1977 by German firm Vaillant. ★The powerful form of the Group 5 car is depicted in style. ★Features recreations of the horizontally opposed 6-cylinder engine, suspension, roll cage, cockpit and more.

Information is current as of September 5, 2023. Specifications are subject to change without notice.

1/24 Sports Car Series no.64

Toyota Soarer 3.0GT Limited

Item No: 24064

★This plastic model assembly kit depicts the 3.0GT-Limited model from the second generation Soarer, which debuted in January 1986. ★The timeless body lines of this evergreen car are captured with accuracy. ★Features a detailed depiction of the inline-six engine, complete with various lines and piping. ★The stylish interior is depicted with aplomb in 1/24 scale.

Information is current as of September 5, 2023. Specifications are subject to change without notice.

1/35 Military Miniature Series no.385

Livestock Set II

Item No: 35385

★Add some life to your dioramas with this set featuring a horse, cow and pig, 2 sheep and 3 dogs. ★Each animal is depicted in natural pose. ★Features an ergonomic parts breakdown for fuss-free assembly.

Information is current as of September 5, 2023. Specifications are subject to change without notice.

1/35 Military Miniature Series no.100

British Churchill Crocodile

Item No: 35100

100 not out!
This model, the 100th in Tamiya's famed 1/35 Military Miniature Series, recreates the Churchill Crocodile. It was the only British tank in WWII which was equipped with flamethrower capabilities; the Churchill Mk.VII infantry tank was fitted with a nozzle in place of the front machine gun. An armored trailer provided fuel and compressed gas. Around 800 were manufactured during the war, and found use not only with British forces but also in support of U.S. troops, which did not possess such a flamethrower tank.

About the Model
This 1/35 scale plastic model kit recreates the Churchill Crocodile. ★Length with trailer attached: 340mm. The powerful form of the vehicle is accurately depicted. ★Model can also be assembled as a Churchill Mk.VII infantry tank. ★Tank-trailer joint offers both vertical and horizontal movement. ★Choose whether to depict trailer maintenance hatch in open or closed position. Open position allows inspection of recreated canisters and valves. ★Includes 2 realistic figures.

The information on this page is correct as of January 30, 2015. Specifications are subject to change without notice.

Special Edition Static Model Product

1/350 Japanese Navy Submarine I-400 (Special Edition)

Item No: 25426

A Singular Concept
The I-400 was constructed as a submergible aircraft carrier the like the world had never seen and was able to launch three Seiran aircraft. With an overall length of 122m, width of 12m, and a 6,560 ton displacement, the size was comparable to a destroyer class warship and it was the world's largest submarine at the time. In addition, it had the ability to circumnavigate the world one and a half times without needing to refuel or restock: it was believed possible for the I-400 to make surprise attacks both on the U.S. East Coast and the Allied-held Panama Canal. Construction of the I-400 was completed near the end of the WWII in December 1944. It was on its way with the second submarine in its class the I-401 to the U.S. Naval base at Ulithi, however neither submarine saw action due to the end of the war. It is said that due to its superior design, the I-400 is a forerunner of modern day strategic nuclear missile submarines.

About the Model
★This is a 1/350 scale plastic model assembly kit. Length: 348.5mm. ★The kit accurately recreates the mammoth form of the I-400. ★Clear parts around the cylindrical hangar let you show off the three Seiran aircraft that can be placed inside. ★Photo-etched parts really up the detail on crane arm, antenna pole, Seiran propellers and handrails. ★Guideline stickers are included to help with attachment of the handrail parts. ★Four metal torpedoes are included, as are clear parts for the Seiran canopy. ★The kit comes with 48 figures and a display base.

Information is current as of September 6, 2023. Specifications are subject to change without notice.

Electric R/C Car Series no.714

1/10 R/C Volkswagen Golf II GTI 16V Rally (MF-01X)

Item No: 58714

A True Icon
The Golf is one of Volkswagen's most iconic cars. From its first appearance in 1974, the Volkswagen Golf has continued to develop and lead the worldwide compact car class, all the while also actively participating in motorsport. The second-generation model - the result of a full model change in 1983 - had a GTi sports model with a 1,781cc inline-4 engine. This assembly kit R/C model depicts that car, which met with success in global rally races, in 1986 becoming champion of its class. It features a lightweight and durable polycarbonate body, paired with the MF-01X chassis that parlays its shaft-driven 4WD into a great drive on road and flat dirt.

MF-01X - Compact 4WD At Home on a Range of Surfaces
Based around a tough monocoque frame with integrated gearboxes, this compact 4WD chassis gives a thrilling drive whether you take it on road or flat dirt surfaces. It features a rear-mounted motor, with gear-driven rear wheels and a propeller shaft taking power to the front. Both front and rear gearboxes have differential gears. The battery pack location in the chassis center secures excellent balance, while 4-wheel independent double wishbone suspension employs friction dampers. Off-road capable M-05Ra chassis uprights and hub carriers are also included, and 8-spoke wheels are paired with rally block tires.

Specifications
★Length: 397mm, width: 170mm, height: 142mm ★Wheelbase: 239mm (L) ★Tire width/diameter (front & rear): 26/60mm ★Tread (front & rear): 138mm ★Monocoque frame ★Shaft-driven 4WD ★3-bevel differential gears ★2-piece steering tie-rod ★4-wheel double wishbone suspension ★Front & rear friction dampers ★Gear ratio = 9.5:1 ★Type 540 motor ★Electronic Speed Controller (sold separately)

Separately Required Items
★2-channel R/C system w/ESC ★R6/AA/UM3 batteries for transmitter ★Battery pack & charger

Information is current as of August 29, 2023. Specifications are subject to change without notice.

Electric R/C Car Series no.724

1/10 R/C 2003 Ford Focus RS Custom (TT-02)

Item No: 58724

In Sharp Focus
This R/C car assembly kit depicts the high-performance rally-oriented RS version of the 1998 debut Ford Focus compact car with various customizations. Its powerful body is recreated in polycarbonate, and the model is based upon the efficient shaft-driven 4WD TT-02 chassis.

TT-02: Adaptable, balanced shaft driven 4WD
The shaft-driven 4WD TT-02 chassis employs a longitudinal layout with the battery on the left and the motor on the right, to give excellent stability. In addition, it features identical left and right suspension arms and uprights for ease of assembly, plus easy-to-maintain gearboxes. It is a highly adaptable chassis, as it offers 2 different wheelbases, 2 ground clearance settings and 2 tread set-ups in addition to a range of 10 possible gear ratios. It is not short on looks either, with brake disc-shaped wheel hubs and stylish front bumper supports. Silver color fin-spoke wheels use semi-pneumatic slick tires.

Specifications
★Length: 427mm, width: 185mm, height: 145mm ★Wheelbase: 257mm ★Tire width/diameter: 27/67mm (front & rear) ★Bathtub-type frame ★Shaft-driven 4WD ★Front/rear 4-bevel plastic differentials ★3-piece steering tie-rod ★4-wheel double wishbone suspension ★Front/rear friction dampers ★Gear ratio = 8.27:1 (9 further ratios from 11.38:1 to 7.28:1 possible with use of separately-sold pinions) ★Type 540 motor ★Electronic Speed Controller (ESC) is sold separately.

Separately Required Items
★2-channel R/C system w/ESC ★R6/AA/UM3 batteries for transmitter ★Battery pack & charger

Information is current as of September 1, 2023. Specifications are subject to change without notice.

Electric R/C Car Series no.726

1/10 R/C XV-02RS PRO Chassis Kit

Item No: 58726

On-Road Oriented Rally Chassis!
This 4WD touring chassis assembly kit features a front midship motor and transmits power from the spur gear in the center via identical length front and rear propeller shafts, and is ideally setup for on-road running. 39T differential gears front and rear, and one setup option 40T differential gear are included, facilitating changes to drive balance. It features optimum balance and a slim chassis with carbon fiber-reinforced rigid lower deck. The 4-wheel independent double wishbone suspension has dedicated aluminum-cylinder oil dampers.

Featured Components
Drivetrain: Full ball bearings, front and rear aluminum propeller shafts, front and rear oil-filled gear differentials (2x 39T and 1x 40T gears included), front and rear universal drive shafts
Suspension: Front and rear aluminum oil dampers (blue caps, touring car size), 6-degree caster blocks, turnbuckle upper arms, 3.5mm thickness carbon damper stays
Chassis: Carbon fiber-reinforced lower deck, aluminum servo mount, angled front bumper, hi-torque servo saver

Specifications
★Length: 368mm, width: 180mm ★Wheelbase: 257mm ★Carbon fiber-reinforced plastic bathtub frame ★Front midship motor, shaft-driven 4WD ★Front & rear oil-filled gear differentials ★3-piece steering tie-rod ★4-wheel double wishbone suspension ★Aluminum cylinder oil dampers (blue caps, touring car size) ★Gear ratio = 7.00:1 using kit 26T pinion (14 ratios between 10.71:1 and 6.28:1 are possible with separately sold pinions) ★Electronic speed controller (ESC) is sold separately.

Separately Required Items
★Body ★Type 540 motor ★2-channel R/C system w/ESC & low-profile servo ★R6/AA/UM3 batteries for transmitter ★Battery pack & charger

Information is current as of August 29, 2023. Specifications are subject to change without notice.

Hop-Up Options no.2072

XV-02 Aluminum Steering Arms (L/R)

Item No: 22072

★These precision crafted aluminum steering arms feature built-in 850 ball bearings for smooth motion. ★They will also firm up the steering setup and give a more direct driving feel. ★Arms have the iconic Tamiya blue anodized finish.

Information is current as of August 1, 2023. Specifications are subject to change without notice.