Item No:51737

R/C Spare Parts No.1737

BT-01 FR SETUP SPUR GEAR SHAFT SET

Replace parts in a timely fashion to ensure that your car runs at peak performance.

Information is current as of March 5, 2024. Specifications are subject to change without notice.

Item No:51736

R/C Spare Parts No.1736

BT-01 T PARTS (SUSPENSION ARMS)

Replace parts in a timely fashion to ensure that your car runs at peak performance.

Information is current as of March 5, 2024. Specifications are subject to change without notice.

Item No:51734

R/C Spare Parts No.1734

BT-01 F/L PARTS (R/C DECK, REAR BODY MOUNT BASE)

Replace parts in a timely fashion to ensure that your car runs at peak performance.

Item No:51733

R/C Spare Parts No.1733

BT-01 E PARTS (SUB FRAME)

Replace parts in a timely fashion to ensure that your car runs at peak performance.

Information is current as of March 5, 2024. Specifications are subject to change without notice.

Item No:51732

R/C Spare Parts No.1732

BT-01 C PARTS (WHEEL AXLES)

Replace parts in a timely fashion to ensure that your car runs at peak performance.

Information is current as of March 5, 2024. Specifications are subject to change without notice.

Item No:70258

Educational Construction Series (Parts) No.258

UNIVERSAL SLIDER SET

This set makes sliders that run along straight and separately sold curved Tamiya universal arms, changing gearbox rotation into motion in a straight line. They can also be sandwiched between two universal arms. Sliders have no fewer than nine different attachment holes, unlocking a myriad of construction types. ★This set contains parts for two 29mm-diameter sliders 20mm in height, two 170mm universal arms (width: 10mm, thickness: 3.5mm), plus screws and nuts for attachment.

Information is current as of March 5, 2024. Specifications are subject to change without notice.

Item No:69945

Side Cutters & Modeling Knives No.45

MODELER'S SIDE CUTTER α (WHITE)

★This versatile and long-lasting set of side cutters will be a great long-term addition to your tool kit, and is now available with handles in white. ★Carbon tool steel blades give a superlative cutting edge. ★Handles feature the Tamiya logo in gray print.

Information is current as of March 5, 2024. Specifications are subject to change without notice.

Item No:58735

All Electric R/C Car Series No.735

1/10 R/C MOTUL AUTECH Z (TT-02)

The Motul Autech Z won the opening race of the 2023 Super GT season on the way to a successful year in which it finished third in the overall rankings. This R/C model assembly kit depicts that car, with a polycarbonate body and stickers to recreate the numerous sponsor logos. It is based upon the versatile shaft-driven 4WD TT-02 chassis.

Information is current as of March 5, 2024. Specifications are subject to change without notice.

Item No:58729

All Electric R/C Car Series No.729

1/10 R/C OPEL KADETT GT/E (MB-01)

This R/C model assembly kit recreates the GT/E, a high-spec version of Opel’s 1970s hit car the Kadett, with a polycarbonate body depicting the classic 2-door form. The model is based upon the MB-01 chassis, a versatile platform which can be assembled as front- or rear-wheel drive and in one of three wheelbases.

Information is current as of March 5, 2024. Specifications are subject to change without notice.

All Electric R/C Car Series No.731

1/10 R/C 1997 MERCEDES-BENZ CLK-GTR (TC-01 CHASSIS)

Item No:58731

This R/C model assembly kit recreates the Mercedes-Benz CLK-GTR car which took six wins in dominating the 1997 FIA GT Championship. Although inheriting the 2-door coupe form and front section of its base road car, the racecar looked rather different and that aerodynamically honed form is recreated by a polycarbonate body, while separately molded components are used for the nose emblem, A pillar-mounted side mirrors, rear spoiler and rear wing. A full sticker sheet recreates this successful car's livery to round off the model.

TC-01: Seriously Low-Profile
This durable composite monocoque-frame chassis provides shaft driven 4WD from a central motor via front and rear propeller shafts, with oil filled gear differentials. 4-wheel independent double wishbone suspension employs long arms, plus inboard setups front and rear with oil dampers actuated by push rods and rocker arms to allow the use of low-profile bodies. Adjust spacer width to easily alter camber, skid and toe angle settings. Both suspension arms and uprights are identical left, right, front and rear, for more efficient pit work.

Specifications
★Length: 470mm, width: 194mm, height: 115mm ♦Wheelbase: 257mm ♦Tread: 159mm (front), 163mm (rear) ♦Tire width/diameter: 26/67mm (front & rear) ♦Composite monocoque-frame chassis ♦Midship motor, shaft-driven 4WD ♦Front & rear oil-filled gear differentials ♦3-piece steering tie-rod ♦Front & rear inboard 4-wheel independent double wishbone suspension ♦CVA oil dampers (front & rear) ♦Gear ratio = 7:50:1~5.25:1 (6.56:1 with kit 24T pinion) ♦Type 540 motor and electronic speed controller (ESC) are sold separately.

Separately Required Items
♦Type 540 motor ♦2-channel R/C system w/ESC ♦R6/AA/UM3 batteries for transmitter ♦Battery pack & charger

Information is current as of February 5, 2024. Specifications are subject to change without notice.