Item No:18664

Mini 4WD PRO Series No.64

TYXIV (ME CHASSIS)

This is a high-performance Racing Mini 4WD assembly kit TYXIV whose body is designed by Takayuki Yamazaki. The fluorescent green body is lightweight and gives a lower center of gravity. An air intake and outlets are aerodynamically designed, and front and rear fenders have 2 assembly options for large and small diameter tires. Also, a tinted smoke canopy and a cockpit with a driver figure can be chosen between, to give the model a different look. The efficient ME chassis uses a double-shaft motor, and this kit includes race-oriented super hard small diameter low-profile tires.

ME Chassis
The ME is the third double shaft motor chassis after the MS and MA, and its initials are derived from its "Midship Evolution" concept. Lightweight, flexible and easy to get started with, its outstanding combination of rigidity and flex ensures a fluid drive, while the ease of assembly is very much in the vein of the MA chassis. The chassis and its A parts are molded in lightweight, tough ABS resin, and low-friction plastic bearings ensure efficient drive. Its bumpers are separately molded, and the chassis has a speedy 3.5:1 gear ratio.

Specifications
●Length: 156mm, width: 97mm, height: 33mm ( with canopy), 35mm (with cockpit and driver figure) ●Includes a double-shaft motor ●3.5:1 gear ratio ●Easy snap-together assembly ●Includes super hard small diameter low-profile tires (black) *Hard tire compound – push firmly to attach to wheel.

Separately Required Items
★R6/AA/UM3 batteries x2

Information is current as of September 3, 2026. Specifications are subject to change without notice.

Item No:95707

Mini 4WD Limited Edition Products

TRAIL MINI 4WD HALLOWEEN VERSION (EZ CHASSIS)

Limited Edition

This is a special model Trail Mini 4WD with a pumpkin (jack-o'-lantern), symbol of the globally popular Halloween festival on 31 October. The purple body is inspired by UTVs (Utility Task Vehicles), and a pre-painted and assembled jack-o'-lantern is seated in the cockpit with roll cage. The EZ chassis is assembled by simply snapping and fitting parts together and runs powerfully with a 4WD system using a double-shaft motor. This easy assembly Halloween machine features purple body and wheels and orange spike tires.

EZ Chassis
The EZ chassis is assembled simply by snapping and fitting parts together, and runs on one R6/AA/UM3 battery. Gears are placed into the chassis frame with a motor on top, and then the cover is snapped into place; chassis parts are clear orange plastic to let you see what is happening inside. Purple dish wheels are paired with spike tires and the model's 50:1 gear ratio ensures that it runs at a manageable speed and has great torque for a powerful drive.

Specifications
●Length: 130mm, width: 72mm, height: 71mm. ●Motor included. ●Gear ratio = 50:1 ●Snap-together assembly (no cement required) ●Metallic body stickers included

Separately Required Items
●R6/AA/UM3 battery x1

Item No:58762

All Electric R/C Car Series No.762

1/10 SCALE R/C 4x4x4 PICK-UP TRUCK CLOD BUSTER (2026)

This R/C assembly kit creates the Clod Buster, which is inspired by American monster trucks and features huge tires and high-lifted body on its dedicated chassis. The realistic body is durable styrene plastic and can be painted with plastic paints while front and rear bumpers, front grille and supercharger on the hood are metal-plated. Front and rear link arm rigid axle suspension is equipped with 2 spring friction dampers for each wheel; 8 dampers in total support this heavy-duty model. Huge semi-pneumatic tires with 165mm diameter and 110mm width give excellent off-road performance in conjunction with 55mm ground clearance. The 4-wheel steering (4WS) system realizes great maneuverability and tighter turning circles for a large-sized R/C model.

4WD & 4WS Chassis
Bathtub frame with durable link arm rigid axle suspension features a heavy-duty structure with link arms held by lateral arms and axle stays, and two friction dampers for each wheel. Axle housings have integrated sealed gearboxes with motors for both front and rear. Power is transmitted via gears effectively and differential gears offer smooth cornering, allowing the big Clod Buster to move quickly. Also, the 4WS system steers front and rear wheels in opposite directions - with a single steering servo - for tighter turning circles. The kit includes the Tamiya TEU-201BK twin motor ESC which allows smooth control of this twin-motor R/C model.

Specifications
●Length: 480mm, width: 380mm, height: 340mm ●Wheelbase: 270mm ●Weight: 3,945g (without R/C equipment). ●Tread: 267mm (front & rear) ●ABS bathtub type frame ●Twin-motor 4WD ●3-bevel gear differentials ●4-wheel steering with a single steering servo ●Front leading arm/rear trailing arm rigid suspension ●2 friction dampers for each wheel ●Gear ratio = 30.1:1 ●Tire width/diameter: 110/165mm ●Type 540 motors x2 ●TEU-201BK electronic speed controller included

Separately Required Items
●2-channel R/C system ●R6/AA/UM3 batteries for transmitter ●Battery pack & charger

Information is current as of September 3, 2026. Specifications are subject to change without notice.

Item No:28502

Clic Loc 1/35 Dinosaurs Series

1/35 SCALE FUKUISAURUS

Become an expert on Fukuisaurus
What kind of dinosaur was Fukuisaurus? Why were its fossils found in Japan? What physical features did they have? How was the natural environment at that time? A greater understanding makes your model more realistic and the modeling experience more fun. Click the icon below to see a detailed explanation by experts of dinosaur studies.

Fukuiraptor and Fukuisaurus : Japanese Dinosaurs

The age of the dinosaurs: an era that continues to fascinate as we make further discoveries and gain a deeper understanding of what was happening hundreds of millions of years ago.

Fukuisaurus is a herbivorous dinosaur believed to have lived around 120 million years ago in the Early Cretaceous period. Fossilised remains were discovered in Katsuyama City in Fukui, Japan, an area renowned for its fossil finds. It was the first dinosaur in Japan to have a fully reconstructed skeleton, and in 2003 it was given the species name Fukuisaurus tetoriensis: the former means “lizard of Fukui” and the latter refers to the Tetori Group, in whose Kitadani formation the fossilized remains were found. Fukuisaurus is believed to have grown to 5.2 meters in length and been able to move on two or four legs as needed. It clipped leaves off of vegetation with its beak-like mouth and chewed them with its back teeth.

Based upon academic research
This is a scale model with realistic depictions of shape, pose and even skin texture based upon evidence gathered from research performed by recognized academic institutions and giving it life.
With the cooperation of Dinosaur Institute, Ltd.
Design consulting: Kazunari Araki
Supervised by Takuya Imai, Associate Professor at Fukui Prefectural University and Researcher at Fukui Prefectural Dinosaur Museum.

No cement required – the Clic Loc series!
Faithful to their subjects in form but with a simple assembly process in which parts simply fit together, these Clic Loc series models achieve a fine finish using a small number of parts.

What color was Fukuisaurus?
Unfortunately, there is no evidence in the fossil record regarding its color, but we can refer to its distant relatives in the modern day, and there are plenty of ideas in reference materials both printed and electronic. Think about the environment it lived in, too! Tamiya Color paint products are recommended.

About the Model
★This is a 1/35 scale plastic model assembly kit. Length: 134 mm. ★Snap-together assembly. ★The kit comes with a display base part, and human silhouettes to give a sense of scale. ★A detailed color leaflet is included with background information on Fukuisaurus and other dinosaurs discovered in Fukui. ★Comes with a paper sheet the same size as the package, featuring illustrations of vegetation and scenery.

Information is current as of September 2, 2026. Specifications are subject to change without notice.

Item No:95555

Mini 4WD Limited Edition Products (Parts)

2mm ALUMINUM LOCK NUT (PURPLE, 5PCS.)

Limited Edition

★Stylish purple anodized aluminum lock nuts, great for securing rollers, mass dampers and so on. ★They feature a resin section for the screw to bite into, minimizing the possibility of their coming loose due to shocks and vibrations. ★Use them for a supremely reliable ride.

Compatible Cars
Mini 4WD & Mini 4WD PRO cars

Information is current as of September 2, 2026. Specifications are subject to change without notice.

Item No:95711

Mini 4WD Limited Edition Products (Parts)

SUPER FM FLUORESCENT-COLOR CHASSIS SET (PINK/GREEN)

Limited Edition

The Super FM chassis is aerodynamically designed and has plenty of advantageous features such as motor cooling ducts and rear roller stays. Separate parts such as gear cover and rollers are also fluorescent pink and green, giving a lot of customizing options. Create your own unique machine with these fluorescent pink and green chassis and your painted body!

Information is current as of September 2, 2026. Specifications are subject to change without notice.

Item No:95556

Mini 4WD Limited Edition Products (Parts)

2mm ALUMINUM LOCK NUT (ORANGE, 5PCS.)

Limited Edition

★Stylish orange anodized aluminum lock nuts, great for securing rollers, mass dampers and so on. ★They feature a resin section for the screw to bite into, minimizing the possibility of their coming loose due to shocks and vibrations. ★Use them for a supremely reliable ride.

Compatible Cars Mini 4WD & Mini 4WD PRO cars cars

Information is current as of September 2, 2026. Specifications are subject to change without notice.

Item No:95718

Mini 4WD Limited Edition Products (Parts)

LOW FRICTION HI-MOUNT TUBE STABILIZER SET (WHITE) MINI 4WD STATION

Limited Edition

These low-friction POM plastic stabilizers can be attached to front rollers, and help balance the car if it loses shape during a corner. Molded in white, they will also give your car a fresh look. ★Diameter: 8mm, height: 10mm. ★Set includes three stabilizers, plus screws, etc. for attachment.

Information is current as of September 2, 2026. Specifications are subject to change without notice.

Item No:95514

Mini 4WD Limited Edition Products (Parts)

MINI 4WD HG MAINTENANCE BASE (180x210mm)

Limited Edition

★This ultra-handy item will take care of multiple Mini 4WD pit needs, with separate trays that can be used for motor, gears, screws, nuts, shafts, batteries and more. ★The central area is the perfect size for Tamiya HG Aluminum Setting Boards. ★Basic measurements corresponding to Mini 4WD regulations are also noted on this product. ★Dimensions: 210mm x 180mm. ★Material: non-phthalate ATBC-PVC

Information is current as of September 2, 2026. Specifications are subject to change without notice.

Item No:95396

Mini 4WD Limited Edition Products (Parts)

19mm ALUMINUM ROLLERS (5 SPOKES) w/PLASTIC RINGS (RED)

Limited Edition

★Lightweight and tough race-spec rollers featuring built-in ball bearings for super-smooth rotation. ★These components feature a stylish 5-spoke design, with plastic rings in red giving a tasteful splash of color.

Compatible Cars
Mini 4WD and Mini 4WD PRO cars

*Some bodies may require modifications

Information is current as of September 2, 2026. Specifications are subject to change without notice.