GForce soon have new aluminium pit tools available in the form of a shock holder and parts tray. Starting with the shock holder, the all-aluminium part takes a maximum of four shock absorbers with a diameter of up to 13mm and a total body and piston rod length of 50mm. An inner 10.5mm and four outer 4mm holes also hold tools and wrenches needed for shock (re)building. The shock holder is available in blue and black colour. Also new is a 120x150mm parts tray, again made from aluminium and sporting a total of three compartments for small parts such as screws, nuts, bearings, bodyclips and more. Like the shock holder the parts tray is available in blue and black anodising.
XRD have several new 2014 EFRA-legal exhaust systems and new heavy-duty silicone manifold gaskets available. Starting with the exhausts, available now are the 2676 200mm Touring, 2068 1/8th On-Road and GT as well as the 2058 and 2058 Evo 1/8th Buggy exhaust. All come including a suitable manifold, mounting springs and silicone gasket for a drop fit. Also new are special silicone pipe and manifold gaskets made from a very durable silicone that withstands temperatures of up to 330°C without any problems. The gaskets fit a wide range of exhausts and they are available now.
Capricorn introduce the LAB 801 Black Edition 1/8th nitro on-road kit. Following the success of the C02 Black Edition the chassis features black instead of red anodised aluminium parts along many improvements and refinements such as a new narrow main chassis, a redesigned radio plate for increased flex and corner speed, new V2 shock absorbers, an updated spring combination, front aluminium bearing holders, a new front shock tower, and a new reverse type clutch with aluminium clutch bell. Also included are several option parts such as two different design front anti-roll bars, 29T/423T and 30T/435T pulley/belt combos and white plastic ball cups, a new servo saver for finer Ackermann angle adjustments as well as a redesigned engine mount. The Black Edition kit is available now.
Capricorn introduce the LAB 801 Black Edition 1/8th nitro on-road kit. Following the success of the C02 Black Edition the chassis features black instead of red anodised aluminium parts along many improvements and refinements such as a new narrow main chassis, a redesigned radio plate for increased flex and corner speed, new V2 shock absorbers, an updated spring combination, front aluminium bearing holders, a new front shock tower, and a new reverse type clutch with aluminium clutch bell. Also included are several option parts such as two different design front anti-roll bars, 29T/423T and 30T/435T pulley/belt combos and white plastic ball cups, a new servo saver for finer Ackermann angle adjustments as well as a redesigned engine mount. The Black Edition kit is available now.
Team Orion soon have three new Vortex Mini-Z brushless motors for the Mini-Z VE available. Coming as 5600kv Stock, 8500kv Torque and 9500kv Speed variant the motors are designed to replace the stock brushless motor with a drop-in solution. All motors come pre-wired with gold-plated connectors.
Panther introduce the Rattler blue groove tread for the stadium truck class by announcing the ST Rattler tyre. Designed for hard packed “blue groove” tracks the tread pattern makes for both forward and side bite with the tyre being available in Panther’s super soft to medium soft standard as well as “blue” firm clay and standard clay rubber.
Serpent now have new pre- and semi-painted E-Avenger bodyshells for the Cobra-E 1/8th off-road buggy available. The pre-painted versions are available with orange, red, blue and green highlights while the semi-painted body only requires the addition of a single colour to create the illusion of a professionally painted body. All five new bodies are moulded from high-quality polycarbonate, they sport cutting lines for easy fitting and they are a direct replacement for the stock Cobra-E body.
We have 701 guests online