TQ R/C & Hobbies

Tamiya Indonesia Championship 2019

  • Seri 1 : 24 Feb 2019 - Sunter International Speedway
  • Seri 2 : 31 Maret 2019 - Sunter International Speedway
  • Seri 3 : 28 April 2019 - East RC
  • Seri 4 : 07 Juli 2019 - Sunter International Speedway
  • Regulations attached PDF

COMING SOON

COMING SOON in TQ RC and HOBBIES
New Sanwa MX-6
Place your order now….

Hobby Wing

TQ R/C AND HOBBIES IS NOW

A DISTRIBUTOR FOR HOBBY WING PRODUCTS

Nov 2013
Nov 2013

Nov 2013 (5)

New from RPM comes this gear cover for the use with VTS clutch equipped Team Associated B4, T4 and SC10 vehicles. The part is modelled after RPM’s iconic gear cover but features additional clearance for the taller VTS clutch while maintaining a sleek and sturdy overall appearance. It is made from hard-wearing nylon material, comes with a super soft slipper access cover and the cover greatly reduces the chance of dirt and debris entering the delicate main and pinion gear area. The cover is available in standard black or blue colour.

Coming end of December is Yokomo’s new YRS Roadster 1/12th scale ARTR kit. The vehicle is based around a direct drive 2WD rear motor monocoque chassis with inline battery mount, direct drive steering and adjustable front suspension parts. The platform shares the tyres and wheels with the Yokomo GT series cars and the 340mm long roadster will become available with a red, yellow or green body in a factory assembled almost-ready-to-run form including a brushed 540-size motor. Coming as an option is also a drive set including a 2.4GHz radio system, servo, brushed speed contoller, LiPo battery and suitable charger.

Serpent have new option parts for the Spyder SRX2 buggy available in the form of aluminium steering parts, vented slipper plates, titanium-nitride coated suspension pins and carbide differential balls. Starting with the steering parts, first up is the steering rack set that is CNC-machined from high quality aluminium. The grey-colour parts make for a flex-free and super-precise steering and included in the kit are two bellcranks and the steering link. The assembly uses the original ball races that come with the buggy kit. Next up are aluminium servo mounts, designed to replace the stock plastic parts the mounts come pre-threaded and grey anodised to fit the remainder of the option parts. Like the steering rack kit the mounts are made to assist with rock solid handling even on high grip surfaces.

Bittydesign have introduced the Nardò 190mm touring car bodyshell. Tested and developed for several months in Italy by their official development team together with German and Finnish team drivers the final result is a bodyshell with different recognisable features, in particular the front and rear tyres area. Testing has shown that the body gives lots of steering on corner entry but at same time plenty of grip and speed in the second part of the turn along with stability under acceleration. Made to meet EFRA specs, it is expected to receive its homologation number in January. Made from 0.75mm thick high quality polycarbonate, the body comes with a complete set of large plastic washers to fix the rear wing perfectly along with steel screws & nuts. Expect the product to arrive at distributors in the next 10 days.

Team Associated introduce the new Reedy pro silicone wire and low-profile bullet-type connectors. Starting with the wire, it was developed to be lightweight and highly flexible while offering efficient current flow at the same time. The thin silicone insulation is yet sturdy enough to withstand the rigours of racing and the wire is available as 1 meter long 12AWG/4mm, 14AWG/3mm and 16AWG/2.7mm variant in any colour you want – as long as it is black. Also new are 14mm long low-profile bullet-type connectors. Coming in a standard 4mm and also new-type 5mm variant the flat top plugs are pre-shaped for easy soldering. They are silver-plated for a low resistance connection and the will become available as pair or 10-piece pack. Last but not least in the line of new electric accessories is a set of coloured shrink tube for motors and speed controllers. The kit contains three pieces each of black, red, blue, orange, and yellow shrink tubing.

News

Social sharing

Who's Online

We have 638 guests online