TQ R/C & Hobbies

Tamiya Indonesia Championship 2019

  • Seri 1 : 24 Feb 2019 - Sunter International Speedway
  • Seri 2 : 31 Maret 2019 - Sunter International Speedway
  • Seri 3 : 28 April 2019 - East RC
  • Seri 4 : 07 Juli 2019 - Sunter International Speedway
  • Regulations attached PDF

COMING SOON

COMING SOON in TQ RC and HOBBIES
New Sanwa MX-6
Place your order now….

Hobby Wing

TQ R/C AND HOBBIES IS NOW

A DISTRIBUTOR FOR HOBBY WING PRODUCTS

  • «
  •  Start 
  •  Prev 
  •  1 
  •  2 
  •  Next 
  •  End 
  • »
Page 1 of 2
Jul 2012
Jul 2012

Jul 2012 (11)

Wednesday, 18 July 2012 19:15

JConcepts Finnisher for Xray XB9

Further expanding their line of Finnisher bodies, JConcepts have made their popular body shell available for the Xray XB9. Increased windshield angle provides a steady force upfront during mid-flight wind gusts on large jumps while the forward cab placement changes performance / visible bias which helps steering rotation in low traction corners. The side-pods have a strong and chiseled look, including a recessed area in the rear which allows another option for air-escape. The chassis side-guard to body fit has been tightened up which helps eliminate large empty voids that contribute to mid-flight directional changes. The area behind the cab has been greatly lowered exposing more of the engine heat-sink allowing more heat-escape while the V-stepped feature which is a highlighted styling cue of the Finnisher buggy bodies has been incorporated toward the rear and allows an additional area that can be trimmed to allow air-flow through the body.

Wednesday, 18 July 2012 19:14

Tamiya 417X ‘Reedy Race’ chassis

To commemorate Viktor Wilck’s win at the Reedy Invitational touring car race in May, Tamiya have released a limited edition (200pcs) version of the TRF417X called the TRF417X Reedy Race. A small update from the original car it has been altered to help improve the low speed traction so it features an updated chassis and top deck. Also the shock towers have been made from 3.5mm thick carbon fibre and feature shock mounting holes that allow for a more precise setting change. The battery mount has been made of metal to increase weight low down and it will be supplied with front and rear gear diffs. Finally it comes with chrome and blue Tamiya decals.

Roche have introduced two new items for touring car, the first is this set of aluminium body height adjuster, the idea for which came from factory driver Elliott Harper. The adjuster makes it easier to adjust the height of the body shell, from 0-5mm. There is a 1mm o-ring inside the adjuster so that it will not change height during use. Three colours are available, blue, purple & titanium, to suit all cars with a 6mm body post. Also new for the Tamiya TRF417 is an aluminum anti-roll bar mount. CNC-machined from 6061 T6 aluminium, the roll-bar is centered by a 4mm rod stopper and the tension on the roll bar is adjusted by the 3mm set screw on both sides of the holder. With perfect alignment and a harder material than the original plastic material mounts, the roll bar will always function freely.

Wednesday, 18 July 2012 19:13

Akula Racing AKX2 Thresher conversion kit

Akula Racing have announced the AKX2 Thresher chassis conversion kit for the Ansmann X2C and Teacm C TC02C kits. The kit replaces the three-piece moulded plastic chassis with a 3mm thick 6082 aluminium chassis. This is fitted with carbon fibre side plates to control the flex, this gives the option to tune the chassis flex by changing the height of these from the chassis, the higher they are the stiffer the chassis becomes. The main benefit from a one piece aluminium chassis over the moulded plastic on the X2C/TC02C is that it has much more consistent and controllable flex which improves steering response, gives more overall grip, greater consistency and even better rear traction.

Wednesday, 18 July 2012 19:11

Hobbytech Spirit EP 1/8th brushless buggy

Seen at this year’s toy fair Hobbytech have released their new Spirit EP 1/8th scale brushless chassis. This high spec competition buggy features a narrow 3mm lightweight chassis plate design with optimal weight distribution and ultra low center of gravity. Other highlights include machined aluminium rear hubs and steering knuckles, hard coated shock bodies, lightweight aluminium front and rear adjustable toe-in plates, a 2 piece motor mount and carbon fibre shock towers.

Wednesday, 18 July 2012 19:11

F.V.S.S. bearing grease

F.V.S.S. bearing grease provides great protection to your bearing by maintaining lubrication and adding an extra barrier that helps block dust/dirt to reach the deep groove. This grease is a light white and capable of performing at temps between -50°C to 150°C and ensures incredible smoothness, extending the life of your bearing. The grease is supplied in a syringe which makes it super easy to apply. The syringe holds 1 oz (19 g) of grease and ships as pictured minus the ziplock bag which includes a rubber sealing tip.

Wednesday, 18 July 2012 19:10

S-Workz S350 BE1 conversion kit

S-Workz have been in touch to tell us that their S350 BE1 conversion kit is now available. The set allows you to convert your gas powered BK1 1/8th scale buggy into the brushless BE1 and comes complete with everything you need, minus electronics, such as new chassis, battery mounts, body shell etc.

Wednesday, 18 July 2012 19:06

Associated 16° caster blocks and spindles

Precision machined from 7075 aluminium, these 16° caster blocks and spindles have been tested and developed by Team Associated’s top pilots to provide a more forgiving steering feel and improved suspension characteristics. Used to secure wins at countless events, including the Silver State Nitro Challenge, Alabama Manufacturers Shootout and French Nationals, the Vertical Caster Blocks and Spindle assembly further optimizes the geometry for all RC8 vehicle platforms. Features include integrated steering stops, lowered roll center, allows lubrication of bearings while assembled and hat bushings and pins are now secured with set screws. They fit all early and later models of the RC8, RC8T, and SC8, nitro and electric.

Wednesday, 18 July 2012 19:06

Arrowmax 64 pitch pinions

Arrowmax have released a full set of premium-quality pinions in 64 pitch. Made from the highest quality 7075-T6 aluminium and hard coated they are both tough and lightweight. Available in a full range from 17T – 52T.

Wednesday, 18 July 2012 19:05

HPI Ford Fiesta WR8 Flux RTR

To partner the super-cool WR8 3.0 World Rally Championship replica, HPI Racing have also got a Flux-powered electric version that is tuned for tarmac rally fun and excitement. The WR8 Flux has all of the tough drivetrain components of the nitro version, however it’s powered by a 4000Kv Flux Vektor motor and your choice of 2S or 3S LiPo battery. It’s ready to fly over jumps and blast down the street right out of the box.

  • «
  •  Start 
  •  Prev 
  •  1 
  •  2 
  •  Next 
  •  End 
  • »
Page 1 of 2

News

Social sharing

Who's Online

We have 1732 guests online