TQ R/C & Hobbies

Tamiya Mini 4WD Asia Challenge 2025 (TMAC 2025)

 

Referring to the announcement made by Tamiya, Inc. in their website : https://www.tamiya.com/english/newstopics/2025/singapore_malaysia_tmac.html regarding the qualification race of Tamiya Mini 4WD Asia Challenge 2025 (TMAC 2025) for Singapore and Malaysia racers, PT Tamindo Plastic Model / TQ R/C and Hobbies, is planning to conduct the qualification race for the racers from Singapore and Malaysia, with the following venue:


Day / Date : Sunday / 08 June 2025
Place : Mall Mangga Dua Square, 1st floor, Hall A
Registration open date: 24 May 2025
Registration closing date: 31 May 2025
Registration google form:

https://forms.gle/ZqUybUaVissSRpbb8

Registration fee: IDR 300,000 per racer, eligible for 20 run

Please kindly note that the organizer reserve full rights to cancel the event should the organizer deem the race participants to be too small and inefficient to conduct the race. We require minimum attendance of 10 racers from each country.  For example, if there is only 10 racers from country X and 2 racers from country Y, then we will only conduct the qualifications from country X only.

Regulation:

1.  Race system is bracket system 4-2-1

Each Racer will buy 1 card for 20 run for Stage 1
Stage 2, each Racer can only have 4 runs
Stage 3, each Racer can only have 2 runs
Stage 4, each Racer can only have 1 run and after this run car will be quarantined

2.  All parts MUST BE Tamiya original parts. 
3.  Racer can use their own rechargeable batteries
4.  Other regulation we will follow TMAC 2025 Stock Class (attached pdf)
5.  Other regulations if not yet stated or unclear, will be informed during the race and all decision from the organizer is FINAL.

Other things to note:

1.  Please note that all racers should bear their own tickets and accomodation to Jakarta.
2.  Winners from the qualifications for position 1-4 from each country, will only be given entry rights. They shall bear their own tickets and accomodations during TMAC 2025 in Taiwan.

Page 7 of 334

Rate this item
(0 votes)
Item No:70268 Educational Construction Series (Units) No.268 INFRARED REMOTE CONTROL UNIT This infrared remote control unit is great for use in robotics and other creations. The controller features two sets of 9 buttons (red and blue), plus a mode button. It can control up to two motors, and if you purchase two units, you can control two different models in the same area at the same time. It can also be setup to provide commands…
Rate this item
(0 votes)
Item No:70269 Educational Construction Series (Units) No.269 UNIVERSAL GEAR SET This set of gears will prove invaluable in your construction projects. It includes two each of 10T (both round and hex hole), 20T, 30T and 40T gears – a total of ten. They are recommended for use with universal plates and gearboxes from the Tamiya Educational Construction series. Information is current as of May 1, 2026. Specifications are subject to change without notice.
Rate this item
(0 votes)
Item No:58760 All Electric R/C Car Series No.760 1/10 SCALE R/C BMW M3 SPORT EVO JAGERMEISTER 1992 (TT-02) In 1992 the BMW M3 Sport EVO treated German Touring Car Championship (DRM) fans to numerous on-track battles with its Mercedes rival; powered by a 350 hp-plus, 2.5-liter inline-4 DOHC 16-valve engine, it was used by both works and privateer teams, the latter including the Linder team, whose car is recreated by this R/C model assembly kit.…
Rate this item
(0 votes)
Item No:69949 Side Cutters & Modeling Knives No.49 MODELER'S SIDE CUTTER α (MINT GREEN) Limited Edition ★This versatile and long-lasting set of side cutters will be a great long-term addition to your tool kit, and is now available with grips in mint green. ★Carbon tool steel blades give a superlative cutting edge. ★Grips feature the Tamiya logo in gray print. Information is current as of May 1, 2026. Specifications are subject to change without notice.
Rate this item
(0 votes)
Item No:87239 Other No.239 MODELING BRUSH REST Simply fold this polypropylene sheet together and you have an effective brush rest, which has four large and three smaller indentations in which you can put your brushes when you aren’t using them. The indentations are lower on one side to avoid any paint dripping back up the grip.   Specifications ★Assembled dimensions: 85mm width, 105mm length, 35mm height ★Polypropylene Information is current as of May 1, 2026.…
Rate this item
(0 votes)
Item No:95185 Mini 4WD Limited Edition Products (Parts) TORQUE-TUNED 2 MOTOR PRO J-CUP 2026 Limited Edition This is a special version of the Torque-Tuned 2 PRO Motor commemorating the Japan Cup 2026, and featuring a special label in black and gold, plus an orange end bell. The Torque-Tuned 2 Motor PRO gives wonderful acceleration and minimal speed loss on slopes and turns - it is a great option for technical circuits. *Please note that 8T…
Rate this item
(0 votes)
Item No:95184 Mini 4WD Limited Edition Products (Parts) TORQUE-TUNED 2 MOTOR J-CUP 2026 Limited Edition This is a special version of the Torque-Tuned 2 Motor commemorating the Japan Cup 2026, and featuring a special label in orange to match the end bell. It gives wonderful acceleration and minimal speed loss on slopes and turns, and is a great option for technical circuits. *Please note that a pinion gear is separately required. Not for use with…
Rate this item
(0 votes)
Item No:95183 Mini 4WD Limited Edition Products (Parts) HYPER-DASH MOTOR PRO J-CUP 2026 Limited Edition This is a special version of the Mini 4WD Hyper-Dash Motor PRO released to commemorate the Japan Cup 2026, and with red end bell and dedicated label. It is at home on a range of courses, from twisting and turning technical ones to straight-dominated speed layouts. *8T pinion gears are sold separately.   Specifications ★Input voltage: 2.4-3.0V ★Torque at recommended…
Rate this item
(0 votes)
Item No:95182 Mini 4WD Limited Edition Products (Parts) HYPER-DASH 3 MOTOR J-CUP 2026 Limited Edition This is a special version of the Hyper-Dash 3 motor released to commemorate the Japan Cup 2026, with a red end bell and commemorative sticker. This high-powered motor provides awesome balance between speed and longevity, making it a great option to power your Mini 4WD machine on a whole variety of courses. *Pinion gear is sold separately. Not compatible with…
Rate this item
(0 votes)
Item No:22099 Hop-Up Options No.2099 LT TORQUE-TUNED MOTOR (35T) This low turn, hi-torque tuned motor is excellently suited to use in R/C tractor truck models. It allows more precise speed control at lower velocities, easier driving with trailers, and a more realistic drive, with more effective acceleration, even when towing a trailer in top gear. Ball bearings make for easier maintenance and dust covers keep out dust and dirt. Timing can be set between -15…
Page 7 of 334

Social sharing

Who's Online

We have 250 guests online