TQ R/C & Hobbies

Tamiya Mini 4WD Asia Challenge 2025 (TMAC 2025)

 

Referring to the announcement made by Tamiya, Inc. in their website : https://www.tamiya.com/english/newstopics/2025/singapore_malaysia_tmac.html regarding the qualification race of Tamiya Mini 4WD Asia Challenge 2025 (TMAC 2025) for Singapore and Malaysia racers, PT Tamindo Plastic Model / TQ R/C and Hobbies, is planning to conduct the qualification race for the racers from Singapore and Malaysia, with the following venue:


Day / Date : Sunday / 08 June 2025
Place : Mall Mangga Dua Square, 1st floor, Hall A
Registration open date: 24 May 2025
Registration closing date: 31 May 2025
Registration google form:

https://forms.gle/ZqUybUaVissSRpbb8

Registration fee: IDR 300,000 per racer, eligible for 20 run

Please kindly note that the organizer reserve full rights to cancel the event should the organizer deem the race participants to be too small and inefficient to conduct the race. We require minimum attendance of 10 racers from each country.  For example, if there is only 10 racers from country X and 2 racers from country Y, then we will only conduct the qualifications from country X only.

Regulation:

1.  Race system is bracket system 4-2-1

Each Racer will buy 1 card for 20 run for Stage 1
Stage 2, each Racer can only have 4 runs
Stage 3, each Racer can only have 2 runs
Stage 4, each Racer can only have 1 run and after this run car will be quarantined

2.  All parts MUST BE Tamiya original parts. 
3.  Racer can use their own rechargeable batteries
4.  Other regulation we will follow TMAC 2025 Stock Class (attached pdf)
5.  Other regulations if not yet stated or unclear, will be informed during the race and all decision from the organizer is FINAL.

Other things to note:

1.  Please note that all racers should bear their own tickets and accomodation to Jakarta.
2.  Winners from the qualifications for position 1-4 from each country, will only be given entry rights. They shall bear their own tickets and accomodations during TMAC 2025 in Taiwan.

Jan 2021
Jan 2021

Jan 2021 (9)

Protoform is once again throwing it back to the glory days of American road racing with their latest entry in a line of bodies for Vintage Trans-Am racing, the 1967 Dodge Dart. The Dart was one of most unique cars in the famous Trans-Am series, with its flat-sided, compact-muscle look. Protoform has captured all the details of the 3-time race-winning car in 1:10 size, to fit 190mm touring cars fitted with their VTA tires & wheels. For more aero tuning, an add-on decklid spoiler is also included. This officially licensed body is formed from a single piece of high-quality, light…
Due to the success of 721 Superveloce Limited edition 3.5cc off-road engine Reds Racing have decided to release a new version of the same engine that will be available for the complete 2021 year, together with 721 Scuderia Gen2 and 721 Corsa engines. The main objective was to develop a super fast engine able to guarantee a good fuel economy. Internally it sports an extra tuned sleeve and crankshaft with special modifications to the sleeve and crankshaft by Mario Rossi which increases engine power noticeably and guarantees good fuel mileage at the same time. The new airboost backplate has been…
This new 1963 Ford Falcon from JConcepts is intended for street racing and drops to the popular Team Associated DR10 and SCT conversions as well as drag racing builds currently in the market. During the design, it was important to maintain a narrow width to match track widths of popular vehicles and to slip through the air at a high rate of speed. Also, a lower trim line on the sides and front chin-spoiler minimises draft inside the body shell. The round and beady headlights create the feel for this legendary vehicle and the bar grille separates a broad front-end.…
SWorkz have introduced their new S35-T2 1/8 nitro truggy. The geometry of the car aims to provide great corner speed with exceptional traction and improved control. Featuring a T7075 hard anodised and lightened aluminium chassis, this wide layout has been tested by their team driers to guarantee the best performance. The newly developed Truggy HET differentials are included and provide traction that was not possible before. The new S35-T2 also comes with a longer shock layout in the front and rear, the construction of which is adapted to that new optimised layout. The steering geometry, with new Ackerman and steering…
LC Racing release this optional body shell for their 1/14th scale EMB1 buggy. Made from high quality polycarbonate, the new shell offers a more conventional mid cab design, in place of the kit standard cab forward body shell design. Supplied unpainted.
From Yeah Racing, an upgrade to their Tornado series of cooling fans will be their upcoming series of Twistex shrouded fans. Designed for cooling high performing touring car motors which reach high temperatures, the specially designed shroud directs airflow and helps dissipate heat. It includes stealthy black wires for that pro factory look and the shroud features a groove in the bottom to allow for routing the cable on either sides, for clean installations.
Presenting Wolverine, ZooRacing’s newest high-performance touring car body on the market. Featuring lots of new features to improve the handling, making it more dynamic, more contact pressure offers more stability in corners with lots more rotation. The aerodynamic efficiency has been improved again as well. The overall length has been shortened to achieve a lesser inertia and therefore a better rotation around the vertical axis. For more steering in fast corners they’ve redesigned the front and hood and made them steeper. To more easily steer the airflow along the sides over the rear wheel arches to the rear wing, to…
Schumacher have released this new pivot ball suspension conversion for their Mi7 touring car. This comprehensive kit is all that is required to upgrade your Mi7 to the spec their team have been running and achieving great results with. The conversion offers improved suspension geometry, flex characteristics, a large weight saving and easier maintenance. Included in the kit is four wishbones and pivot ball mountings and also new shock brackets for improved geometry. These shock brackets also include a horizontal rear body post mounting option for lower Centre of Gravity. Includes new lower hub mounting arrangement, which is stronger and…
Axial have introduced another first with the 1/10 scale RBX10 Ryft 4WD. This ready-to-run vehicle lets any RC driver experience the thrills of rock bouncer off-road action. Full-size rock bouncers refuse to stop, or even back down on the throttle, when facing steep climbs and massive rocks. So does the RBX10 Ryft 4WD. The robust, custom tube chassis is engineered from a high-strength composite plastic that withstands the hard knocks of RC off-roading, even while moving at the high speeds produced by a strong powertrain featuring a 4S-capable, 2200Kv brushless motor. Both the front and rear axles boast a rugged…

News

Social sharing

Who's Online

We have 712 guests online