TQ R/C & Hobbies

Tamiya Mini 4WD Asia Challenge 2025 (TMAC 2025)

 

Referring to the announcement made by Tamiya, Inc. in their website : https://www.tamiya.com/english/newstopics/2025/singapore_malaysia_tmac.html regarding the qualification race of Tamiya Mini 4WD Asia Challenge 2025 (TMAC 2025) for Singapore and Malaysia racers, PT Tamindo Plastic Model / TQ R/C and Hobbies, is planning to conduct the qualification race for the racers from Singapore and Malaysia, with the following venue:


Day / Date : Sunday / 08 June 2025
Place : Mall Mangga Dua Square, 1st floor, Hall A
Registration open date: 24 May 2025
Registration closing date: 31 May 2025
Registration google form:

https://forms.gle/ZqUybUaVissSRpbb8

Registration fee: IDR 300,000 per racer, eligible for 20 run

Please kindly note that the organizer reserve full rights to cancel the event should the organizer deem the race participants to be too small and inefficient to conduct the race. We require minimum attendance of 10 racers from each country.  For example, if there is only 10 racers from country X and 2 racers from country Y, then we will only conduct the qualifications from country X only.

Regulation:

1.  Race system is bracket system 4-2-1

Each Racer will buy 1 card for 20 run for Stage 1
Stage 2, each Racer can only have 4 runs
Stage 3, each Racer can only have 2 runs
Stage 4, each Racer can only have 1 run and after this run car will be quarantined

2.  All parts MUST BE Tamiya original parts. 
3.  Racer can use their own rechargeable batteries
4.  Other regulation we will follow TMAC 2025 Stock Class (attached pdf)
5.  Other regulations if not yet stated or unclear, will be informed during the race and all decision from the organizer is FINAL.

Other things to note:

1.  Please note that all racers should bear their own tickets and accomodation to Jakarta.
2.  Winners from the qualifications for position 1-4 from each country, will only be given entry rights. They shall bear their own tickets and accomodations during TMAC 2025 in Taiwan.

Aug 2019
Aug 2019

Aug 2019 (6)

Coming soon from O.S. Engines is the new 3.5cc R2104 competition nitro on-road engine. The 9-port power plant was developed with this year’s IFRMAR 1/8th Nitro On-road World Championship in mind with an updated liner and piston increasing overall torque while the DLC-coated crankshaft offers improved transition between low and high RPM. The engine also sports a new combustion camber insert with a silicone O-ring, adapted from O.S. Engine’s off-road engines, preventing dust and dirt contamination. The R2104 is rounded off with a new design cooling head in a 2-tone black and red finish with white laser-engraved graphics. Beside the…
Leadfinger Racing have introduced a new heavy duty variant of their popular Strife body shell for the Tekno RC ET410 4WD truck. The new thicker version is moulded from the same material used for Leadfinger Racing’s 1/8th scale bodies, meaning more longevity for racing and bashing applications. As usual the body comes clear, including window masks and a decal sheet.
Coming for the Traxxas TRX-4 Sport is JConcepts’ new 1982 GMC K10 12.3” wheelbase truck body shell. For the early 80’s model year, the iconic square body emerged, a chiseled front-end, gently swept back from the center. Fenders were redesigned as well as the hood and the classic vent windows. A new sloped hood replaced the previous generation hood that had less rake, and the exterior changes include optional headlights and an updated tailgate. Side-markers were now horizontal rather than vertical which is another tell-tale look of the later generation styling. The wheel wells have been scaled to the original…
Ruddog have introduced their new 6500mAh 15.2V 100C Graphene Plus LiHV pack for 1/8th scale applications. Built from high-quality 100C high-voltage LiPo cells the battery offers a high capacity and low internal resistance, ideal for demanding off-road applications and long main finals. The translucent 138x46x48mm hardcase is equipped with 5mm power connectors and an integrated 5-pin XH balancer port, doing away with the fiddly wire balancer ports of most 4S packs. Included with the battery, that weighs in at 560g, comes a balancer adapter for easy charging and storage balancing. The LiHV pack is supplied in a neat reusable packing…
Coming from World Champion Products is the VS Racing VSR03-EV2 3.5cc nitro on-road engine. Based on the O.S. Speed R2103 the super-long stroke engine is developed for high-class competition use and it features a 7-port design, CNC-machined piston and a 14mm “Rody” modified and DLC-coated crankshaft. New to the EV2 variant are optimised modifications to the crankshaft as well as a new combustion camber insert with a silicone O-ring that ensures a cleaner area between the cooling head and the crankcase. The engine is available separately or as combo set including VS2098 or VS2069 exhausts.
Kyosho have revealed first images and information on their forthcoming new MP10T 1/8th scale nitro truggy kit that will hit stores by the end of August. The main chassis is a 3mm 7075 aluminium plate with hard anodising and improved flex characteristics. Engine/fuel tank, servos, RX box and battery box have move forward for optimal weight balance. The MP10 radio plate design features a revised servo position and increased strength with 3.0mm thickness, increased from 2.5mm while side guards – by reducing thickness and height – are a lot lighter than the previous parts while and looking sharp as they…

News

Social sharing

Who's Online

We have 307 guests online