TQ R/C & Hobbies

Tamiya Mini 4WD Asia Challenge 2025 (TMAC 2025)

 

Referring to the announcement made by Tamiya, Inc. in their website : https://www.tamiya.com/english/newstopics/2025/singapore_malaysia_tmac.html regarding the qualification race of Tamiya Mini 4WD Asia Challenge 2025 (TMAC 2025) for Singapore and Malaysia racers, PT Tamindo Plastic Model / TQ R/C and Hobbies, is planning to conduct the qualification race for the racers from Singapore and Malaysia, with the following venue:


Day / Date : Sunday / 08 June 2025
Place : Mall Mangga Dua Square, 1st floor, Hall A
Registration open date: 24 May 2025
Registration closing date: 31 May 2025
Registration google form:

https://forms.gle/ZqUybUaVissSRpbb8

Registration fee: IDR 300,000 per racer, eligible for 20 run

Please kindly note that the organizer reserve full rights to cancel the event should the organizer deem the race participants to be too small and inefficient to conduct the race. We require minimum attendance of 10 racers from each country.  For example, if there is only 10 racers from country X and 2 racers from country Y, then we will only conduct the qualifications from country X only.

Regulation:

1.  Race system is bracket system 4-2-1

Each Racer will buy 1 card for 20 run for Stage 1
Stage 2, each Racer can only have 4 runs
Stage 3, each Racer can only have 2 runs
Stage 4, each Racer can only have 1 run and after this run car will be quarantined

2.  All parts MUST BE Tamiya original parts. 
3.  Racer can use their own rechargeable batteries
4.  Other regulation we will follow TMAC 2025 Stock Class (attached pdf)
5.  Other regulations if not yet stated or unclear, will be informed during the race and all decision from the organizer is FINAL.

Other things to note:

1.  Please note that all racers should bear their own tickets and accomodation to Jakarta.
2.  Winners from the qualifications for position 1-4 from each country, will only be given entry rights. They shall bear their own tickets and accomodations during TMAC 2025 in Taiwan.

Page 323 of 327

Rate this item
(0 votes)
Grade-Up Parts No.416 60mm REINFORCED SHAFTS (BLACK, 4PCS.) Item No:15416 ★These carbon reinforced hex shafts are compatible with Mini 4WD PRO machines including MS, VS, TZ, FM series chassis. ★Features gloss-finished black metal plating.
Rate this item
(0 votes)
1/24 Sports Car Series No.318 Porsche 935/78 Moby Dick “Martini” Item No:24318 【 The Moby Dick 】 Dominating the Group 5 category and winning consecutive championships in the 1976 and 1977 seasons was the Porsche 935. For the 1978 season, Porsche left the World Championship for Makes and created the 935/78 Turbo with the goal of claiming the Le Mans 24 Hours. The car had a long, ground-hugging body to increase maximum speed and was…
Rate this item
(0 votes)
1/24 Sports Car Series No.317 Mercedes-Benz SLR McLaren 722 Edition Item No:24317 【 The Premium Sportscar 】 The 1955 Mille Miglia saw the Mercedes-Benz 300 SLR won the fastest victory in the history of the event. The machine featured the car number “722”, which was incorporated into the name of the Mercedes-Benz SLR McLaren 722 Edition supercar announced at the 2006 Paris Motor Show. A 5.5 liter supercharged V8 engine was fitted to the SLR’s…
Rate this item
(0 votes)
1/24 Sports Car Series No.316 ASTON MARTIN DBS Item No:24316 【 Aston Martin's Flagship Model 】 Aston Martin, a renowned British sports car manufacturer founded in 1914, released their flagship DBS in the summer of 2007. The car's design features gorgeous, flowing curves and liberal use of carbon fiber while its front-midship 510hp 5,935cc V12 engine delivers power to the rear wheels via a 6-speed manual gearbox. This car is a scintillating blend of high-performance…
Rate this item
(0 votes)
1/20 Grand Prix Collection No.60 Lotus Type 79 1978 Item No:20060 【 The Black Beauty 】 In 1977, Lotus introduced a ground effect car, the Type 78 which had a slim monocoque chassis and wide side pontoons with undersurfaces like inverted aircraft wings. Round 6 Belgium GP in the 1978 season saw the introduction of the further evolved Type 79. The fuel tanks were placed behind the cockpit and the rear suspension featured effective inboard…
Rate this item
(0 votes)
1/10 Expert Built Series No.102 XB Alfa Romeo MiTo (M-05) Item No:57802 【 The Baby Alfa 】 The three-door Alfa Romeo MiTo made its debut in 2008. It was named after Milan, where it was designed, and Torino, where it was manufactured. Featuring a stylish form and a sporty driving performance powered by a front-mounted 1.47 liter inline 4-cylinder engine, the MiTo attracts many fans all around the world. This is a ready-to-run R/C model…
Rate this item
(0 votes)
1/10 Electric R/C Car Series No.457 MERCEDES-BENZ UNIMOG 406 SERIES U900(CC-01) Item No:58457 【 Love to Work 】 The Mercedes-Benz Unimog is a multi-purpose truck with unrivalled off-road performance and its name is an acronym which stands for the German description "UNIversal-MOtor-Gerat." The 406 also has the ability to equip any of approximately 3000 attachments for every imaginable task. In addition to work vehicle variants like snow plow, fire engine, road maintenance truck, and tow…
Rate this item
(0 votes)
1/10 Electric R/C Car Series No.458 LAMBORGHINI GALLARDO LP560-4 SUPER TROFEO(TT-01 TYPE-E) Item No:58458 ★The world's fastest one-make race series features the Lamborghini Gallardo LP560-4 Super Trofeo, which comes released as a 1/10 scale R/C model on the TT-01 Type-E chassis. ★The ground-hugging body silhouette, front canards, and distinctive livery have been accurately reproduced. ★LEDs are included to depict head (white) and tail (red) lights for enhanced realism. Specifications are subject to change without notice.
Rate this item
(0 votes)
Limited Edition Mini 4WD Parts SUPER X NUT FASTENED RED PLATED WHEELS S & ARCHED TIRES (w/LOW FRIC. WASHERS) Item No:94730 ★These red metal-plated nut fastened wheels are secured to the shaft with nuts, preventing wheels from coming off during driving. ★Included hard tires are ideal for technical course. ★Low-friction fluorine coated resin washers are also included (8 pcs.).
Rate this item
(0 votes)
Limited Edition Mini 4WD Parts ROLLER ANGLE ADJUSTER PLATE (CARBON REINFORCED) Item No:94729 ★These roller angle adjuster plates are made of carbon-reinforced nylon resin. ★These plates feature high rigidity and have a beautiful carbon texture. ★Roller angle can be adjusted by 1 degree increment from -3 to +3 degrees. Specifications and information coming soon.
Page 323 of 327

Social sharing

Who's Online

We have 265 guests online