TQ R/C & Hobbies

Tamiya Mini 4WD Asia Challenge 2025 (TMAC 2025)

 

Referring to the announcement made by Tamiya, Inc. in their website : https://www.tamiya.com/english/newstopics/2025/singapore_malaysia_tmac.html regarding the qualification race of Tamiya Mini 4WD Asia Challenge 2025 (TMAC 2025) for Singapore and Malaysia racers, PT Tamindo Plastic Model / TQ R/C and Hobbies, is planning to conduct the qualification race for the racers from Singapore and Malaysia, with the following venue:


Day / Date : Sunday / 08 June 2025
Place : Mall Mangga Dua Square, 1st floor, Hall A
Registration open date: 24 May 2025
Registration closing date: 31 May 2025
Registration google form:

https://forms.gle/ZqUybUaVissSRpbb8

Registration fee: IDR 300,000 per racer, eligible for 20 run

Please kindly note that the organizer reserve full rights to cancel the event should the organizer deem the race participants to be too small and inefficient to conduct the race. We require minimum attendance of 10 racers from each country.  For example, if there is only 10 racers from country X and 2 racers from country Y, then we will only conduct the qualifications from country X only.

Regulation:

1.  Race system is bracket system 4-2-1

Each Racer will buy 1 card for 20 run for Stage 1
Stage 2, each Racer can only have 4 runs
Stage 3, each Racer can only have 2 runs
Stage 4, each Racer can only have 1 run and after this run car will be quarantined

2.  All parts MUST BE Tamiya original parts. 
3.  Racer can use their own rechargeable batteries
4.  Other regulation we will follow TMAC 2025 Stock Class (attached pdf)
5.  Other regulations if not yet stated or unclear, will be informed during the race and all decision from the organizer is FINAL.

Other things to note:

1.  Please note that all racers should bear their own tickets and accomodation to Jakarta.
2.  Winners from the qualifications for position 1-4 from each country, will only be given entry rights. They shall bear their own tickets and accomodations during TMAC 2025 in Taiwan.

Page 3 of 190
News
Best known for its car building services, US based Wallie Builds has released this Factory Works Pro Radio Tray for the RC8B4.1 from Team Associated.  With a lot of the conditions in SoCal being loose and rough, Nick Wautlet set out to design an in between weight bias setup.  Team Associated currently offers two Chassis’ for the RC8B4.1.  The FWB Chassis is the standard that most brands are using (Mugen, Xray, Sworkz) and the RWB Chassis is the same length, but the centre items (Engine, pipe, Radio tray [minus Steering servo], centre diff and fuel tank) all move back 10mm. …
Expanding its fleet of P-GT3R body shells offerings,  Italian company Bittydesign has released the Porsche GT3R styled body in 1:7 scale for the Arrma Felony.  After first releasing the body in 1:10 190mm and then 1:12, the 1.5mm thick genuine polycarbonate Lexan 1:7 shell is the first ever on which everything included in the kit arrives already pre-cut: the body, the wing, the light buckets, the front aero flaps.  With everything laser-cut this ensures  a perfect finish. View more images here
Aerox, Schumacher’s accessories brand, has introduced new direct mount brushless servos for the British manufacturer’s Mi9 and FT9 1:10 Touring Cars.  The new LP2s version see’s improvements in having a 4 pole Brushless Motor, a super low profile at 23mm, 3mm shorter than the LP1s and now weighs only 47-grams.  It also features a titanium output shaft with 50% hardness and toughness increase.  The output wire is now from the bottom of the case, making the receiver placement easier.  Now compatible with the high-speed mode of major radios and the i-BUS2 protocol of FlySky Radio, remote setup parameters are now…
Best known as a tyre manufacturer, Jetko Power has released images of its new .21 Offroad engine, the 3-port JP-3.  While giving no specs, on publishing images of the engine and its internals they stated, ‘Jetko Power engines are designed for pure competition.  Through shrewd engineering and precise production with high quality materials, you can expect exceptional performance from Jetko Power. These engines provide efficient fuel consumption for longer run times.  Included is their original exhaust pipe (EFRA2194) that will give linear power and great response to your finger tips.’ View more images here
Following on from its 1:8 GT Bodyshell released earlier this year, the CB-7004, VP-Pro has added second option of bodyshell for the category, the CB-7005.  The new body has optimised aerodynamics for improved race performance offering excellent down force and more speed with lower fuel consumption.  Made from clear polycarbonate, it is available in 2 different thickness, 0.8mm light and 1.0mm standard.  Each option comes with 1.0mm thickness rear wing, mounting hardware, decals and window masks. View more images here
In the next evolution of their ultra-compact B6neo charger, SkyRC presents the B6neo+.  Maintaining the same 82g pocket-sized design, the B6neo+ now delivers even more power with 240W via DC and 126W through USB-C PD 3.1.  Whether you’re in the workshop or at the track, it’s built to perform anywhere with the upgraded version also bringing smarter features.  PD Reverse Discharging allows you to output up to 100W from your battery to power USB-C devices like phones, tools, or even laptops.  Discharge rates are faster, and a built-in battery checker provides detailed voltage readings for LiPo, LiHV, LiFe, and LiIon…
Following on from the recent release of their Modi Motor, Team Cayote has released its all new Crest RS 120 Speed Controller.  Weighing in at just 36 grams, the super light ESC offers an impressive maximum continuous output current of 120A at an astonishing size and weight.  Measuring 35.3mm (L) x 30.5mm (W) x 24.5mm (H), it features ultra-thin, windowed cooling N-MOS technology, and integrates the chip core directly with the metal housing, reducing thermal resistance by 35% compared to traditional MOSFETs.  This results in higher current output while maintaining 98% efficiency and significantly reducing overall thickness within the same…
1:28 and Mini-Z specialists Reflex Racing is finally ready to release their first 1:28 Formula Car Kit, the FX28.  After almost 2 years of conceptualisation and development, the FX28 is a comprehensive new design from the ground up and not just a lengthened 1:28 scale car.  From concept to final product, the Texas based company had three goals – Simplicity, Low Center of Gravity, and Super Narrow Weight Distribution.  In terms of simplicity the FX28 uses a 2 piece front end that is super tough for the demands of open wheel racing.  The car comes with 2 Degrees of Caster…
Florida based JConcepts has updated their S15, S2, F2, and P2 offroad body shells to fit the latest 2025 version of the X2 1:10 2WD buggy from Xray.  All body styles are available in both standard and a lightweight options and ship with window mask, decal sheet and two of the latest Carpet | Turf | Dirt wings for a quick transition from preparation to racing. View each X2 body type here
Yet another old school kit release from Team Associated as they present the RC10T Cliff Lett Edition.   A tribute to the stadium truck that made its mark at the 1991 Florida Winter Champs, this special edition faithfully recreates the look and performance of the original RC10T that Cliff drove to victory at the debut race of this iconic platform.  At the heart of this release is the striking powder-coated fluorescent red chassis, a signature feature that not only catches the eye but also pays homage to the truck that dominated the competition more than three decades ago. View more images…
Page 3 of 190

News

Social sharing

Who's Online

We have 143 guests online