TQ R/C & Hobbies

Tekno RC has announced the release of its latest 1:8 Nitro buggy, the  NB48 2.2.  Following more than two years of rigorous testing and development on tracks across the world, this is the seventh revision of the NB48 series.  Leveraging valuable feedback from team drivers and customers, the NB48 2.2 has already proven its potential by clinching the 2024 ROAR 1:8 Fuel Off-Road Nationals and securing podium finishes in seven out of the past ten major US 1:8 events.  Key enhancements include the new flex-tuned split design 7075 CNC machined shock towers, which significantly improve traction and predictability, and the…

If you are a fan of retro RC buggies then here is another treat for you with Team Associated releasing the YZ10 Classic Kit as a tribute to the successful partnership between Team Associated and Yokomo back in the 80’s.  The partnership between Team Associated and Yokomo goes back as far as 1972.  However, it was the relationship in the early 80s with Yokomo’s YZ-10 that represents a significant chapter in the history of RC racing.  In the world of remote-controlled car racing, the 1989 IFMAR Worlds in Australia marked a pivotal moment. Team Associated and Yokomo emerged as a…

An established producer of 1:28 bodyshells, Indonesian based Subrc has released its first 1:10 Electric Touring Car body the ‘Aguila’.  Based off their 1:28 JX touring Bodyshell, the Aquila bodyshell is designed to offer good cornering speed and good rear downforce.  It comes with pre-marked bodypost for easier setup and 2 line cut for the those who like to run their bodyshell lower.  Subrc offer the Aguila in 2 versions, regular and lightweight, and it come with windows masking and decals. View more images here

Josh Cyrul, one of America’s most experienced electric onroad racers and an accomplished car designer, has posted on his social media images of the new Excelerate RC Prodigy 12 1:12 chassis he has penned.  In the post Cyrul explains, “This is the final prototype fitting of parts so some of the anodize colors are being switched around as well as the shapes and fit of a few parts but everything is in production with a good portion of production already finished.  I’m sure people will say it’s a copy… Until you flip it over and realize it’s for sure not.…

Continuing to expand its offering of LMH 1:10 190mm bodies, MonTech Racing takes a leap forward with the arrival of the CV-Series bodyshell.  The Italian company’s latest bodyshell is designed to fit both Touring Cars (190mm) and Formula 1 chassis with a 260mm wheelbase.  Ffollowing the legacy of the LMH series, the CV-Series boasts exceptional precision, faithfully replicating a real car’s form and function.  Constructed from premium polycarbonate, the it comes equipped with everything you need to hit the track immediately. Headlight decals, window masks, rear wing fixing screws, and aerodynamic fin screws are all included, ensuring a smooth and…

Coming from US based Dork Missile Performance is the Laseris setup station which is available in both 1:10 and 1:8 options.  This tool measures both camber and toe at the same time in half degree increments using a class one laser to pin point the setting.  Camber can be measured from -1 degree to -3 degrees in 1/2 degree increments. While toe will measure either toe-in or toe-out from 1/2 to 4 degrees in 1/2 degree increments.  The laser is rechargeable via standard USB connector and last for 16 hours of use.  The target uses a reflective paint to produce…

Having released its Retro-mod body for the Team Associated B7 and B6.4 in May, Leadfinger Racing has now added a version for the previous B6.3, 6.2 and 6.1 versions of the 2WD Buggy.  The Retro-Mod Buggy Body is a nostalgic throwback that pays homage to the golden era of RC racing.  The body design captures the essence of classic RC aesthetics while incorporating modern engineering and performance enhancements.  Perfect for enthusiasts and collectors alike, the Retro-Mod Buggy Body brings back the iconic style of yesteryears, reminding us of the roots and rich history of RC racing.  Each body is sold clear…

Continuing its latest round of body shell releases, JConcepts is now offering its F2 for Schumacher’s Cougar LD3 2WD Buggy and Cat L1R 4WD Buggy.   As the popularity grows of both Schumacher buggies, JConcepts set off to incorporate all the functionality of the IFMAR World Championship winning shell and wrapped it around the newest offerings from Schumacher Racing.  The exclusive composition of the cab, extra rear windows, louvered roof all tied together with Finnisher “V” configuration makes the F2 a classic performer.   Each body includes two of the 6.5” Carpet | Turf | Dirt wing which is now a standard…

With strong links with full size drifting, Japan’s Yokomo has released a number of new 1:10 body options for RC Drifting.  First of these are pre-painted versions of the Pandem GR86 and Pandem GRA90 Supra.  With these bodies the light/window decals are already applied, and wheel arches are pre-cut, so you can mount them by drilling holes for body mounts or using magnetic mounts.  The car can be easily driven without time-consuming painting work.  Yokomo has also re-released the popular Altezza and Z33 bodies for the Drift Package series.  Both are sold as clear bodies with window decals only. View…

German bodyshell producer PIP-Aero  is now offering its 1:8 GT bodyshell in a pre-cut option.  Looking at GT category, they noticed that there are way more hobby drivers than in 1:10 and 1:8 Nitro Onroad and with bodies more difficult to cut because of the dimension and the weight they made the decision to add a pre-cut option.  This also make sure that they can use a perfect and straight mounted Body.  The Precut version is for all actual brands (Serpent, Hongnor, Xray, Capricorn) and is the same cut for both Nitro and Eletric with Nitro drivers only having to…