TQ R/C & Hobbies

Tamiya Mini 4WD Asia Challenge 2025 (TMAC 2025)

 

Referring to the announcement made by Tamiya, Inc. in their website : https://www.tamiya.com/english/newstopics/2025/singapore_malaysia_tmac.html regarding the qualification race of Tamiya Mini 4WD Asia Challenge 2025 (TMAC 2025) for Singapore and Malaysia racers, PT Tamindo Plastic Model / TQ R/C and Hobbies, is planning to conduct the qualification race for the racers from Singapore and Malaysia, with the following venue:


Day / Date : Sunday / 08 June 2025
Place : Mall Mangga Dua Square, 1st floor, Hall A
Registration open date: 24 May 2025
Registration closing date: 31 May 2025
Registration google form:

https://forms.gle/ZqUybUaVissSRpbb8

Registration fee: IDR 300,000 per racer, eligible for 20 run

Please kindly note that the organizer reserve full rights to cancel the event should the organizer deem the race participants to be too small and inefficient to conduct the race. We require minimum attendance of 10 racers from each country.  For example, if there is only 10 racers from country X and 2 racers from country Y, then we will only conduct the qualifications from country X only.

Regulation:

1.  Race system is bracket system 4-2-1

Each Racer will buy 1 card for 20 run for Stage 1
Stage 2, each Racer can only have 4 runs
Stage 3, each Racer can only have 2 runs
Stage 4, each Racer can only have 1 run and after this run car will be quarantined

2.  All parts MUST BE Tamiya original parts. 
3.  Racer can use their own rechargeable batteries
4.  Other regulation we will follow TMAC 2025 Stock Class (attached pdf)
5.  Other regulations if not yet stated or unclear, will be informed during the race and all decision from the organizer is FINAL.

Other things to note:

1.  Please note that all racers should bear their own tickets and accomodation to Jakarta.
2.  Winners from the qualifications for position 1-4 from each country, will only be given entry rights. They shall bear their own tickets and accomodations during TMAC 2025 in Taiwan.

1/10 R/C PEUGEOT 306 MAXI (BT-01 CHASSIS)

Rate this item
(0 votes)
1/10 R/C PEUGEOT 306 MAXI (BT-01 CHASSIS) 1/10 R/C PEUGEOT 306 MAXI (BT-01 CHASSIS) Length: 404 mm. Image shows painted and assembled kit.

Item No:58746

All Electric R/C Car Series No.746

1/10 R/C PEUGEOT 306 MAXI (BT-01 CHASSIS)

Based upon the FF hatchback Peugeot 306, the Peugeot 306 Maxi was developed with dedicated components for rallying. A 2.0-liter naturally-aspirated engine in front was capable of 280hp, and the car had enlarged fenders, roof spoiler, and a lightened body. Including the victories in 1996 and 1997 rally races in France, this car achieved many racing successes such as the class championship in the 1996 rally in Monte Carlo and third place in the 5th and 6th races on the 1997 global rally circuit. This R/C model assembly kit is inspired by such rally champions. The car's silhouette is recreated by a polycarbonate body, with stickers included to add an original livery.

Options Galore: the 2WD BT-01 Chassis
The easy-to-drive 2WD BT-01 chassis gives a choice of two types of wheelbase, and front- or rear-wheel drive system so your model remains faithful to its subject. Without removing battery pack, motor and R/C equipment setups from the center frame, simply change attachment directions of final gears and steering linkage to switch between front- and rear-wheel drive; front (FR) or midship rear (MR) motor position can be chosen for rear-wheel drive cars. The 4-wheel double wishbone suspension features symmetrical structure and friction dampers. Unitized sections such as motor mount, final gears and suspension facilitate ease of assembly and effective maintenance. A front-wheel drive setup is recommended for this model.

Specifications
★Length: 404mm, width: 187mm, height: 155mm ★Wheelbase: 257mm (standard) ★Tread: 157mm (front and rear) ★Tire width/diameter: 27mm/67mm (front and rear) ★Bathtub frame ★Front-wheel drive ★Plastic 4-bevel differential gear ★3-piece steering tie-rod ★4-wheel double wishbone suspension ★Friction dampers (front and rear) ★Gear ratio = 8.27:1 (with kit standard 22T pinion) ★Type 540 motor ★ESC included for export.

Separately Required Items
★2-channel R/C system ★R6/AA/UM3 batteries for transmitter ★Battery pack & charger

Information is current as of March 5, 2025. Specifications are subject to change without notice.

Read 6088 times
Published in Tamiya
Tagged under
Social sharing

Related items (by tag)

More in this category: « FUN-VROOM (EZ CHASSIS) 1/10 R/C PORSCHE 911 GT3 R (992) (TT-02 CHASSIS) »
back to top

Our Products

Links

 

 

Social sharing

Who's Online

We have 79 guests online