TQ R/C & Hobbies

Tamiya Mini 4WD Asia Challenge 2025 (TMAC 2025)

 

Referring to the announcement made by Tamiya, Inc. in their website : https://www.tamiya.com/english/newstopics/2025/singapore_malaysia_tmac.html regarding the qualification race of Tamiya Mini 4WD Asia Challenge 2025 (TMAC 2025) for Singapore and Malaysia racers, PT Tamindo Plastic Model / TQ R/C and Hobbies, is planning to conduct the qualification race for the racers from Singapore and Malaysia, with the following venue:


Day / Date : Sunday / 08 June 2025
Place : Mall Mangga Dua Square, 1st floor, Hall A
Registration open date: 24 May 2025
Registration closing date: 31 May 2025
Registration google form:

https://forms.gle/ZqUybUaVissSRpbb8

Registration fee: IDR 300,000 per racer, eligible for 20 run

Please kindly note that the organizer reserve full rights to cancel the event should the organizer deem the race participants to be too small and inefficient to conduct the race. We require minimum attendance of 10 racers from each country.  For example, if there is only 10 racers from country X and 2 racers from country Y, then we will only conduct the qualifications from country X only.

Regulation:

1.  Race system is bracket system 4-2-1

Each Racer will buy 1 card for 20 run for Stage 1
Stage 2, each Racer can only have 4 runs
Stage 3, each Racer can only have 2 runs
Stage 4, each Racer can only have 1 run and after this run car will be quarantined

2.  All parts MUST BE Tamiya original parts. 
3.  Racer can use their own rechargeable batteries
4.  Other regulation we will follow TMAC 2025 Stock Class (attached pdf)
5.  Other regulations if not yet stated or unclear, will be informed during the race and all decision from the organizer is FINAL.

Other things to note:

1.  Please note that all racers should bear their own tickets and accomodation to Jakarta.
2.  Winners from the qualifications for position 1-4 from each country, will only be given entry rights. They shall bear their own tickets and accomodations during TMAC 2025 in Taiwan.

S9452 High-Torque High-Speed

Rate this item
(0 votes)
S9452 High-Torque High-Speed

Futaba S9452 Digital High-Speed/Torque Servo

Stock Number FUTM0662
Manufacturer Number S9452
Accessories
Needed		 Parts
Listing

Notes from the Tech Department

This is the S9452 Digital Hi-Speed.Hi-Torque Servo for many applications,
especially, On-Road Touring Car Use and Comes with "J" Connector Installed.
This servo is designed to be used with 6V receiver packs.


This servo replaced the S9451 servo.


FEATURES: Digitally Enhanced Microprocessor Cut About half the Response Time
From Transmitter Input To Servo Reaction.
Coreless Motor with two ball bearings on output shaft
Metal Gears (to replace, use FUTM3432)
High Torque
Case is Made of Black Plastic with newly developed mounting flanges
Dust and Water Resistant (Not Waterproof)
One year warranty


INCLUDES: One Digital Car/Boat Servo w/Small Round Horn
Two Rectangular Grommets
Four Brass Bushings (eyelets)
One Small Round Horn (already mounted on the servo)
One Three Arm Horn
Order FUTM2250 if mounting screws are needed


SPECS:    Speed: .13 sec/60° @ 4.8V
.11 sec/60° @ 6V
Torque: 102 oz-in (7.4 kg/cm) @ 4.8V
128 oz-in (9.2 kg/cm) @ 6V
Weight: 1.8oz (50g)
Dimensions: 1.6 x 0.8 x 1.4" (40 x 20 x 34mm)


COMMENTS: S9451 Digital Servo Precautions,
-It is best to avoid long leads and Y-harnesses especially with
standard grade wires. If problems are encountered, consider using
heavy duty wire such as Futaba's Heavy Duty Series or Hobbico's
Pro Series, minimizing lead lengths, and/or removing Y-harnesses.
Please Review The Following Points.
(1) When Using Systems With the Battery Fail Safe Function it Has
a Higher Cut-Off Voltage Setting Which Will Cause Shorter
Operation Time.
(2) When Installing the Servo Please Check Pushrod Linkage To Make
Sure There Is No Binding in Order To Prevent Excessive Power
Consumption and Decrease the Life of the Motor and Battery.


This digital servo cannot be used with the following * AM *
transmitters as the servo neutral signal is: 1310us).
CONQUEST AM, FG Series (T4FG, T5FGK,T6FG, T6FGK, T7FGK), New Terratop,
T3EGX, T3PGE, T2NL, T2LGX, T2FR, T2PK series.


For full performance of digital servos, please use them only with FM,
PCM, and HRS systems. Do not use digital servos with AM systems.


Read 43983 times
Published in Futaba
Social sharing
More in this category: « S9353HV High-Voltage High-Torque High-Speed Servo 1/10 R/C M-07R Chassis Kit »
back to top

Our Products

Links

 

 

Social sharing

Who's Online

We have 716 guests online